Type: | Signal Type Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | Signal |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Technical Parameter |
RP-24K2 -B | |
Nominal operating voltage, Un | 24V | |
Maximum continuous operating voltage, Uc | 32V | |
Nominal discharge current In (8/20μs) | 5kA | |
Maximum discharge current Imax (8/20μs) | 10 kA | |
Total discharge current | 20 kA | |
Voltage protection level Up (at 3 kA 8/20μs) |
L-L | ≤60V |
L-PE | ≤600V | |
Rated operating current | 300 mA | |
Maximum load current | <700mA | |
Maximum series impedance | 1Ω/line | |
Maximum transmission rate | 10 Mbps | |
Insertion loss | ≤0.2dB | |
Response time | ≤1ns | |
Protection mode | Line-to-line, Line-PE | |
Deterioration and failure indication | The indication window turns red in failure state | |
Earthing mode | Earthed through earthing terminal | |
Material of enclosures | PBT | |
Enclosure protection class | IP20 | |
Flame-retardant grade | 94V0 | |
Installation mode | Secured by guide rails | |
Overall dimensions (mm) | 90.0*12.5*74.5mm (±0.8) | |
Operating temperature | Normal temperature range: -5°C- 40°C | |
Limit temperature range: -40°C-70°C | ||
Relative humidity | At ambient temperature (25°C): ≤95% | |
Altitude | ≤3000m | |
Dielectric strength | 1.1 kV/1 min |
Suppliers with verified business licenses