Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPM-40/3N+NPG-1U | RPM-60/3N+NPG-1U |
SPD according to IEC 61643-1/11 | Class II | |
SPD according to GB18802.1 | Type II | |
Application | 3+1 | |
Nominal operating voltage Un | 230/400V,50/60Hz | |
Maximum continuous operating voltage Uc | 385V~(Varistor Uc:385V~,GDT Uc:255V~) | |
Protection Voltage, Up | L-N≤1.8Kv,N-PE≤1.0kV | L-N≤2.0kV,N-PE≤1.1kV |
Nominal discharge current In(8/20μs) | 20kA | 30kA |
Maximum discharge current Imax (8/20μs) | 40kA | 60kA |
Leakage current to earth Ic | ≤20μA | |
Response time | L-N≤25ns, N-PE≤100ns | |
Internal protective devices | Built- in thermal tripping device | |
Connect wire terminal | DBN 90 ° sheet terminal(DBN 5.5-16-90,DBN 8-16-90,DBN 14-16-90) | |
Terminal crimping length | 16.0mm | |
Cross- sectional area of input wire | Maximum 16mm2 (for flexible conductor) | |
Conductor crimping installation force | >100N | |
Failure indicator | The indication window turns into red when damaged | |
Remote signaling | Alarm dry contact(RSC: Remote Signal Contact),NC-COM contact | |
Performances of remote signal contact | AC:250V/0.5A;DC:250V/0.1A, 125V/0.2A, 75V/0.5A | |
Cross-sectional area of the signaling wire | Maximum 1.5mm2 | |
Installation mode | Fixed with 4-m3 * 8 screws | |
Housing material | PA66(FR:UL94-V0) | |
Enclosure protection degree | IP20 | |
Dimensions (without terminals) | 138mm×48mm×40mm | |
Module pluggable | Pluggable module (applicable to pressure-sensitive or gas discharge tube module on the panel), easy to replace |
Suppliers with verified business licenses