Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPM1260-30/3N+NPG |
SPD according to IEC 61643-1/11 | Class II |
SPD according to GB18802.1 | Type II |
Application | L-PE |
Nominal operating voltage | 1140VAC |
Maximum continuous operating voltage Uc | AC1260V~ 50/60Hz |
Protection Voltage, Up | ≤5.0kV |
Nominal discharge current In (8/20μs) | 15kA |
Maximum discharge current Imax (8/20μs) | 30kA |
Response time | ≤100 ns |
Internal protective devices | Built- in thermal tripping device |
Cross- sectional area of input/ output wire | 6mm2 ~ 35mm2 |
Bare wire connection length | 12.5mm |
Installation wiring torque(max) | 3Nm |
Failure indicator | The indication window turns into red when damaged |
Remote signaling | Normally closed remote signal contact (RSC), NC-COM-NO contact |
Performances of remote signal contact | AC: 250V/0.5A; DC: 250V/0.1A, 125V/0.2A, 75V/0.5A |
Cross- sectional area of the signaling wire | Maximum 1.5 mm2 |
Installation mode | Using 35mm standard DIN rail |
Housing material | UL94-V0 |
Enclosure protection degree | IP20 |
Operation temperature | -40°C ~ +80°C |
Relative humidity | 5%~95% |
Altitude | -500m~4000m |
Dimensions (without terminals) | 90mm×144mm×65.5mm |
Suppliers with verified business licenses