Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPD48-40/2P |
SPD according to IEC 61643-1/11 | Class II |
SPD according to GB18802.1 | Type II |
Nominal operating voltage Un | DC48V |
Maximum continuous operating voltage Uc | DC85V |
Nominal discharge current In (8/20μs) | 20kA |
Maximum discharge current, Imax (8/20μs) | 40kA |
Protection Voltage, Up | ≤0.6kV |
Application | V- PE, V- PE |
Protection degree | Class C |
Response time | ≤25ns |
leakage current | ≤20μA |
Cross- sectional area of input wire | 6~25mm2 |
Failure indicator | The indication window turns into red when damaged |
Installation wiring torque | 3Nm |
Remote signaling | Normally closed remote signal contact(RSC: Remote Signal Contact), NC- COM- NO contact |
Performances of remote signal contact | AC: 250V/0.5A; DC: 250V/0.1A,125V/0.2A, 75V/0.5A |
Cross- sectional area of the signaling wire | Maximum 1.5mm2 |
Installation mode | Using 35mm standard DIN rail |
Housing material | UL94-V0 |
Enclosure protection degree | IP20 |
Dimensions (without terminals) | 89.5mmx35.8mmx65.2mm (±1 mm) |
Product certification | TUV certification |
Operation temperature | Limit - 40°C ~+70°C Normal -5ºC ~+40ºC |
Relative humidity | 30%~95% (25°C) |
Altitude | ≤3000m |
Atmospheric pressure | 70kPa~106kPa |
Suppliers with verified business licenses