Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPM320-40/PCB3 |
SPD according to IEC 61643-1/11 | Class II |
SPD according to GB18802.1 | Type II |
Application | 2+1(L-PE, N-PE) |
Nominal operating voltage | 230/400V,50/60Hz |
Maximum continuous operating voltage Uc | 320V~ |
Protection Voltage, Up | L/N-PE≤1.5kV L-N≤2.5kV |
Nominal discharge current In (8/20μs) | 20kA |
Maximum discharge current Imax (8/20μs) | 40kA |
Response time | L-N≤25ns, N-PE≤100ns |
Internal protective devices | Built- in thermal tripping device |
Response time
|
≤25ns |
Transient overvoltage characteristics UTOV | 400V/5S |
Overcurrent protection on power side | 80AgL |
Remote signaling | Normally closed remote signal contact (RSC), NC-COM-NO contact |
Performances of remote signal contact | AC: 250V/0.5A; DC: 250V/0.1A, 125V/0.2A, 75V/0.5A |
Installation mode | PCB on-board parallel |
Housing material | PA66 flame retardant grade:UL94-V0 |
Enclosure protection degree | IP20 |
Operation temperature | -40°C ~ +80°C |
Relative humidity | 5%~95% (25°C) |
Altitude | ≤4000m |
Dimensions (without terminals) | 40.8mm×38.0mm×19.5mm |
Environmental requirements | ROHS compliant |
Suppliers with verified business licenses