Type: | Power Source Arrester |
---|---|
Structure: | Zinc Oxide Arrester |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPM-120/3N+NPG |
SPD according to IEC 61643-1/11 | Class 2 |
SPD according to GB18802.1 | Type 2 |
Application | 3+1 |
Nominal operating voltage, Un | 230/400V, 50/60Hz |
Maximum continuous operating voltage Uc | 385V~ ( Varistor Uc:385V, GDT Uc:255V~) |
Protection Voltage,Up@ In | L-N≤3.0kV, N-PE≤1.6kV |
Nominal discharge current In (8/20μs) | 60kA |
Maximum discharge current Imax (8/20μs) | 120kA |
Leakage current to earth Ic | ≤20μA |
Response time | ≤25ns |
Internal protective devices | Built- in thermal tripping device |
External protection device | The incoming line needs to be connected in series with C characteristic circuit breaker with a rated current not exceeding 63A |
Cross- sectional area of input/ output wire | 6~35mm2 |
Bare wire connection length | 12.5mm |
Installation wiring torque(max) | 3Nm |
Failure indicator | The indication window turns into red when damaged |
Remote signaling | Normally closed remote signal contact (RSC: Remote Signal Contact), NC-COM-NO contact |
Performances of remote signal contact | AC: 250V/0.5A; DC: 250V/0.1A, 125V/0.2A, 75V/0.5A |
Cross- sectional area of the signaling wire | Maximum 1.5mm2 |
Installation mode | Using 35mm standard DIN rail |
Housing material | UL94-V0 |
Enclosure protection degree | IP20 |
Dimensions (without terminals) | 90.0mmX108.0mmX65.5mm (±1 mm) |
Suppliers with verified business licenses