Type: | Power Source Arrester |
---|---|
Structure: | Protective Gap |
Installation: | Parallel Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPH320-50/3N+NPE |
Application | L-N, N-PE |
Maximum continuous operating voltage Uc | AC320V 50/60Hz |
Protection Voltage, Up | ≤2.5kV |
Impulse discharge current, Iimp(10/350μs) | 50kA |
Response time | ≤100ns |
External protection device | The incoming line shall be connected in series with c-characteristic circuit breaker with rated current not exceeding 63A |
Cross- sectional area of input wire | 10mm2 ~ 35mm2 Multi strand cord |
Insulation resistance | >100 MΩ |
protection grade | T1/I |
Installation wiring torque(max) | 3Nm |
IP grade | IP20 |
Enclosure protection degree | V0 |
Remote signaling | Normally closed remote signal contact (RSC), NC-COM-NO contact |
Installation mode | Using 35mm standard DIN rail |
Operation temperature | Normal:-5°C ~+40°C;limited-40°C ~+80°C |
Relative humidity | 30%~90% |
Altitude | ≤3000m |
Dielectric strength | 4.2kV/1min |
Dimensions (with terminals) | 98.8mm×144.0mm×65mm(±2mm) |
Suppliers with verified business licenses