Type: | Signal Type Arrester |
---|---|
Structure: | Integrated Structure |
Installation: | Tandem Arrester |
Application: | AC/DC System |
Size: | Small |
Operation Voltage: | Low Voltage |
Customization: |
---|
Suppliers with verified business licenses
Model Parameter |
RPXCCTV-220/2-RJ45 | |||||
RJ45 port | Power port | |||||
Nominal operating voltage | 5V | 220V~ | ||||
Maximum continuous operating voltage Uc | 8V | 320V~ | ||||
Nominal discharge current In (8/20μs) | 1kA | 5kA | ||||
Protection Voltage, Up | Combined waveC1: 1KV/500A Combined waveC2: 4KV/2KA |
Core wire-Core wire | ≤40V | (8/20μs at In) | L-PE | ≤1.1kV |
Core wire-Protective wire | ≤800V | N-PE | ||||
transmission rate | 0~100Mbps | -- | ||||
Maximum series impedance | ≤2.2Ω | -- | ||||
Rated working current | 200mA | 2A | ||||
Maximum load current | 500mA | 2.5A | ||||
Connection form | RJ45connector | Crimping terminal | ||||
Number of protection channels | 1.2 , 3.6 | -- | ||||
insertion loss | ≤0.5dB | -- | ||||
response time | Signal: ≤ 10ns; Power supply: ≤ 25ns | |||||
Sectional area of incoming conductor | 0.5~4mm2 | |||||
Internal protection device | Built in overcurrent and overheating protection device | |||||
Application | Core wire-Core wire;Core wire-Protective wire | |||||
Housing material | Aluminum profile shell | |||||
Enclosure protection degree | IP20 | |||||
Flame retardant grade | 94V0 | |||||
Grounding mode | Grounding wire grounding | |||||
Use environment | Operating temperature: - 40 ~ + 70 ºC; Relative humidity: ≤ 95% (25 ºC); Atmospheric pressure: not less than 74.8kpa | |||||
Overall dimension | 104mm*65.8mm*30mm(Excluding terminal blocks) | |||||
Test standard | EC 61643-21:2000,GB/T 18802.21-2016,YD/T 1235.1-2002 | |||||
Product weight | Net weight 174G / piece, gross weight 204 g / piece |
Suppliers with verified business licenses